en:profile_install [SecureVPN SC

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Profile installation ======

Before installing the profile, you must download and install [[download|WireGuard software]] and then  [[profiles|generate and download SecureVPN profile]].

===== Windows =====
  - Run WireGuard application [[download|installed before]]
  - In the lower left corner of the application, click the "+" button and select the "Import tunnel(s) from file" option and then select the file downloaded in the previous step during [[profiles|generating SecureVPN profile]] {{ :wiki:en_windows_1.jpg?nolink&400 |}}
  - Highlight the imported profile and click "Activate" {{ :wiki:en_windows_2.jpg?nolink&600 |}}
  - Done! Go to the website https://securevpnsc.com/check to check the correct operation of the service. You should see the following view. If the message is red - check if all steps have been correctly performed.{{ :wiki:pl_windows_3.jpg?nolink&500 |}}
===== MacOS =====

  - Run WireGuard application [[download|installed before]]
  - In the lower left corner of the application, click the "+" button and select the "Import tunnel (s) from file" option and then select the file downloaded in the previous step during [[profiles|generating SecureVPN profile]] {{ :wiki:en_mac_1.jpg?nolink&400 |}}
  - Highlight the imported profile and click "Activate" {{ :wiki:en_mac_2.jpg?nolink&600 |}}
  - Done! Go to the website https://securevpnsc.com/check to check the correct operation of the service. You should see the following view. If the message is red - check if all steps have been correctly performed.{{ :wiki:en_mac_3.jpg?nolink&500 |}}
===== Ubuntu/CentOS =====

  - Put [[profiles|generated SecureVPN profile]] into folder **/etc/wireguard** in file **wg0.conf**
  - Run connection by command: **wg-quick up wg0**
  - (optional) You can add connection into autostart by command: **sudo systemctl enable wg-quick@wg0**
===== Android =====

  - Run already [[download|downloaded]] WireGuard application
  - After starting the application, click the blue + icon in the lower right corner of the application and select the "Scan QR Code" option. {{ :wiki:en_android_1.jpg?nolink&400 |}}
  - Scan the QR code downloaded in the previous step during [[profiles|SecureVPN profile generation]]
  - Give any name of your choice to the added profile {{ :wiki:en_android_2.jpg?nolink&400 |}}
  - Sart the connection by switching the switch on the profile list {{ :wiki:en_android_3.jpg?nolink&400 |}}
  - Accept the system warning - the essence of VPN operation is to handle all Internet traffic in order to redirect it through a secure connection - that's what the message is about {{ :wiki:en_android_4.jpg?nolink&400 |}}
  - Done! Go to the website [[https://securevpnsc.com/check|https://securevpnsc.com/check]] to check the correct operation of the service. You should see the following view. If the message is red - check if all steps have been correctly performed. {{ :wiki:pl_android_5.jpg?nolink&400 |}}
===== iOS =====

  - Run already [[download|downloaded]] WireGuard application
  - After starting the application, click the blue + icon in the upper right corner of the application and select the "Create from QR code" option. {{ :wiki:en_ios_1.jpg?nolink&400 |}}
  - Scan the QR code downloaded in the previous step during [[profiles|SecureVPN profile generation]]
  - Give any name of your choice to the added profile {{ :wiki:en_ios_2.jpg?nolink&400 |}}
  - Start the connection by switching the switch on the profile list {{ :wiki:en_ios_3.jpg?nolink&400 |}}
  - Done! Go to the website [[https://securevpnsc.com/check|https://securevpnsc.com/check]] to check the correct operation of the service. You should see the following view. If the message is red - check if all steps have been correctly performed. {{ :wiki:pl_ios_5.jpg?nolink&400 |}}
User Tools

Site Tools

Page Tools
